Dongguan Runzhi Electronics Co., Ltd.

Products

Salt Fog Tester


Keywords :

Floor tester / Humidity Chamber / Aging tester


  • Hits : 13
  • Company : Dongguan Runzhi Electronics Co., Ltd.
  • Telephone : +86 13712847488
Contact Us

Product Details

Contact Us

Five Advantages Of Products

  • Both the inner and outer tanks of the salt spray test machine are integrally molded with epoxy glass fiber reinforced plastic, which has the characteristics of light weight, corrosion resistance, high strength, no leakage, smooth surface, smooth and easy to clean.
  • The water-sealed form prevents the salt mist from overflowing, and the jacketed air duct is heated, so that the working chamber heats up quickly and the temperature is evenly distributed.
  • The top cover of the salt spray tester is designed to have a top angle of 110~112℃, so that the condensed water in the box will not directly drip on the sample. 4. The spray method is tower spray, and the spray tower is placed in the middle of the bottom surface of the studio. The material of the nozzle is made of sintered quartz glass, the sprayed mist is small, and the salt mist is distributed evenly by natural settlement.
  • The control system of the equipment is placed on the upper right side of the salt spray test cabinet, which is convenient for users to operate. The panel is equipped with a power switch, a mist discharge switch, a spray switch, two PID self-tuning digital display instruments, and equipment operation time timing Timers and gap spray timers, and special over-temperature protectors on the circuit board of the salt spray test cabinet
  • The spray method is tower spray, and the spray tower is placed in the middle of the bottom surface of the studio. The material of the nozzle is made of sintered quartz glass, the sprayed mist is small, and the salt mist is distributed evenly by natural settlement.

Product Details

The following is the salt spray test machine:

 

Product parameters of salt spray testing machine: 

 

Product name: Salt spray testing machine

Product model: CZ-60A-90A-120A

Weight: 30000.00 grams

Unit of measurement: Taiwan

Scope of application: suitable for national defense, aerospace, auto parts, electronic parts, etc.

Product Exhibitor: Dongguan Runzhi Electronics Co., Ltd.

 

The basic parameters of the salt spray test machine:

 

The amount of salt spray deposition: 1~2ml/80cm2.h

Material: Imported PVC

Place of Origin: Dongguan

Studio size: 450*600*450mm

After-sales service: nationwide warranty

Quality standard: national standard

Weight: 30 kg

Business model: self-produced and sold

Brand: Runzhi

Model: CZ-60A-90A-120A

Custom processing: Yes

 

The use of salt spray testing machine:

 

1. The salt spray test machine is one of the "three preventions" (damp heat, salt spray, mold) test equipment for artificial climate environment, and is used to study various environmental adaptability in machinery, national defense, light industry, electronics, light industry electronics, instrumentation and other industries An important salt spray test equipment for reliability and reliability. The salt spray test machine can be used for neutral salt spray test according to GB/T2423.17 "Basic Environmental Test Procedure Test Ka: Salt Spray Test Method for Electronic and Electrical Products", as well as acetic acid salt spray test.

2. Brief introduction of the characteristics of the salt spray tester: This salt spray tester complies with CNS, ASTM, JIS, ISO standards, and the salt spray test is for the surface of various materials after coating, electroplating, anode treatment, anti-rust oil and other anti-corrosion treatments , Test the corrosion resistance of its products.

 

Structural characteristics of salt spray testing machine:

 

1. Both the inner and outer tanks of the salt spray test machine are integrally molded with epoxy glass fiber reinforced plastic, which has the characteristics of light weight, corrosion resistance, high strength, no leakage, smooth surface, smooth and easy to clean.

2. The water-sealed form prevents the salt mist from overflowing, and the jacketed air duct is heated, so that the working chamber heats up quickly and the temperature is evenly distributed.

3. The top cover of the salt spray tester is designed to have a top angle of 110~112℃, so that the condensed water in the box will not directly drip on the sample.

4. The spray method is tower spray, and the spray tower is placed in the middle of the bottom surface of the studio. The material of the nozzle is made of sintered quartz glass, the sprayed mist is small, and the salt mist is distributed evenly by natural settlement.

5. The control system of the equipment is placed on the upper right side of the salt spray test cabinet, which is convenient for users to operate. The panel is equipped with a power switch, a mist discharge switch, a spray switch, two PID self-tuning digital display instruments, and equipment operation time timing Timers and gap spray timers, and special over-temperature protectors on the circuit board of the salt spray test cabinet

 

Operation method of salt spray test machine:

 

1. Install the internal parts of the salt spray tester: tower spray device, funnel, round rod, V-shaped sample holder, etc.

2. Connect the air source and turn on the power switch after the power is turned on.

3. Add water to the pressure barrel and the tank, stop adding water after the two low water level lights are off, and add water to the sealing groove to seal.

4. Mix purified water and sodium chloride in a ratio of 1:20. Pour the prepared solution into the reagent inlet (just turn off the low-salt water lamp).

5. After all the lights are off, we can turn on the operation, spray, and timing switches, and turn on the defogging switch after the test is over.

6. According to the test requirements, the equipment has two spray modes: continuous and periodic (the T1 and T2 tables are all set to 0 for continuous spraying, and T1 for intermittent spraying is set to work time, and T2 is rest time). The salt testing machine is a quality assurance laboratory equipment commonly used with constant temperature and humidity boxes and other instruments to better check the physical properties of its products! 

 

Matters needing attention when using salt spray testing machine:

 

1. Regularly clean and maintain the pressure barrel, salt water tank and nozzle of the salt spray testing machine.

2. Do not pour sodium chloride solution manually from the pressure tank. Clean the solution graduated cylinder before adding distilled water.

3. Do not block the rear exhaust pipe during the test, so as to avoid the box body from being deformed due to excessive pressure in the box.

4. Do not put flammable and explosive materials in the box.

5. The pressure gauge at the back of the salt spray testing machine is 2 kg, and the front is 1 kg. Dongguan Runzhi Electronics Co., Ltd. has designed it before leaving the factory, please do not move it.

6. If the spray volume is insufficient, please adjust the spray tower higher, and if the spray volume is too large, lower the spray tower (the standard for collecting spray volume is 1~2ml/h, take the 16-hour average)

 

If you want to know more about the "salt spray tester" or laboratory testing equipment related information, welcome to inquire!

 

If you want to buy our company's salt spray tester or other testing equipment, please call:86+ 13712847488

 

Contact: Mr. Zheng

Company: Dongguan Runzhi Electronics Co., Ltd.

Bottom of the form


Dongguan Runzhi Electronics Co., Ltd.

Contact Person:  Mr. Zheng

Department: Business Department

Post: Sales Manager

Telephone: +86 13712847488

Landline: +86 0769-81660769

Company Address: Room 101, 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China

Factory Address: Room 101, No. 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China

Website: www.instrumentvip.com

Previous: electronic moisture tester (elect...

Next: Biochemical Incubator

Inquiry :

Inquiry