• 1/3
Keywords :
grinding wheel / buffing wheel / abrasion wheel
+86 13712847488

Five Advantages Of Products

  • The grinding wheel is a bonded abrasive that consolidates ordinary abrasives into a certain shape (mostly circular with a through hole in the center) and has a certain strength.

  • The grinding wheel can be used for rough grinding, semi-finishing and fine grinding as well as grooving and cutting of the outer circle, inner circle, plane and various profiles of metal or non-metallic workpieces.

  • The grinding wheel is generally installed on the grinding wheel machine, which is one of the most commonly used machinery and equipment in machinery factories. Whether its installation is reasonable and whether it meets the safety requirements; whether its use method is correct and whether it meets the safety operating procedures.

  • Any grinding wheel has its certain wear and tear requirements. When the wear condition reaches a certain level, it must be replaced with a new grinding wheel. In order to save materials, it is an extremely unsafe and illegal behavior to require the use of super wear. It is generally stipulated that when the grinding wheel is worn to a diameter 10mm larger than the diameter of the chuck, a new grinding wheel should be replaced.

  • Coarse abrasive grains should be used for rough grinding of the grinding wheel. Because the abrasive grains are coarse and the pores are large, the grinding depth can be larger, and the grinding wheel is not easy to block and generate heat. When the grinding wheel is finely ground, the allowance is small, and the roughness value is required to be low, so finer abrasive grains can be selected.

Product Details

Brief introduction of grinding wheel:

  The American original TABER grinding wheel is used with the TABER wheel abrasion machine, and the grinding wheel is matched according to different materials to test the wear resistance of leather, textile, floor, coating and other surfaces. The sample and the grinding wheel are rubbed with a load of 500 or 1000g at a speed of 60 or 72 revolutions to judge the damage on the surface of the sample.


The applicable fields of American original TABER grinding wheel:

  Paper, cardboard, cloth, luggage, carpet, glass, plastic, metal coating, tiles, paint, coating, decorative building materials, flooring materials, high pressure sheets, textiles, plastics, traffic markings, anodizing, wax, labels, Dental materials, automotive interiors, furniture, etc.

American original TABER grinding wheel conforms to the standard:

  ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI, T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS, K6902, JIS L1096, JIS K6964, DIN 52347, DIN 53109, DIN537 54. DIN 53799 and many other standards

American original TABER grinding wheel model selection:

CS-0, CS-10, CS-5, CS-10F, CS-17, S-35, S-32, H-22, H-18, H-10, H-38 and other grinding wheels.

The basic parameters of American original TABER:

Outer diameter 52.7mm,

Inner diameter: 16mm

Thickness: 12.7mm

Specifications: 2 a box

Weight: 0.8KG


Selection table of American original TABER grinding wheel (model, material, grinding characteristics, type, elasticity, composition):

CS10 Soft Rubber & Abrasive Mild Elastic Rubber/Abrasive

CS10F Soft Rubber & Abrasive Very Mild Elastic Rubber/Abrasive

CS17 Soft Rubber & Abrasive Coarse Elastic Rubber/Abrasive

H10 Hard Vitrified Rough Non-resilient Ceramic

H18 hard vitrified medium rough non elastic ceramic

H22 hard vitrified very rough non-resilient ceramic

H38 Hard Vitrified Very Fine Non-Resilient Ceramic

CS0, S32 soft smooth rubber very gentle elastic non-abrasive rubber

S42, S33 Soft Sandpaper Strips Moderate Flexibility Sandpaper Strips

CS5 Soft Wool Felt Non-abrasive Elastic Wool Blanket

S35 Hard Tungsten Carbide Cut or Chipped Non-Resilient Tungsten Carbide

Reminder: Due to the continuous upgrading of the grinding wheel, the picture of the grinding wheel is for reference only, please email us for details! More high-quality products welcome your consultation!