Five Advantages Of Products
- Height ruler is also known as height vernier caliper, the main purpose is to measure the height of the workpiece, but also often used to measure shape and position tolerance dimensions, sometimes also used for marking.
- Digital display height ruler made of high quality stainless steel, durable and wear-resistant, stable base, simple operation.
- Digital display height ruler with fine grinding claw, sensitive response, accurate data.
- Digital display height ruler adopts ergonomic design, feel smooth and comfortable, high precision LCD digital display, British conversion, more intuitive reading.
- Digital display height ruler adopts inclined hand wheel, which can be coarse and fine-tuned. Any value of origin
Introduction of digital display height ruler:
HEIGHT CALIPER, also known as height vernier caliper. As the name suggests, its main use is to measure the height of the workpiece, but it is also often used to measure shape and position tolerances, and sometimes for marking.
Parameters of digital display height ruler:
1) Resolution: 0.01mm
2) Repeatability: 0.01mm
3) Technical standard: JB5609-91
4) Maximum response speed: 1m/s
5) Power supply: button battery, voltage 1.55V
Key function introduction of digital display height ruler:
1) OFF/ON/ZERO-- switch and clear key
2) HOLD-- Hold key
3) ABS-- relative and absolute measurement switch key
4) mm /in-- British conversion key
5) TOL-- tolerance zone key
6) SET-- set number key
Introduction to the output jack of digital display height ruler:
The measurement results can be entered into a computer or a special printer using a special wire.
Interface working mode: synchronous serial.
Data: binary encoding, 24-bit width, each data is sent twice, period 300ms (quick display state 20ms), transmission time 0.5ms.
Leads: data D, clock CP, power supply.
Data pulse amplitude: 0 level ≤0.2V, 1 level ≥1.3V
Clock CP: 90KHz, active high level.
The use of digital display height ruler:
1) Dry the surface of the protective film (see Precautions), clean the working surface of the base and measuring claw, install the measuring claw and lock it according to the structural diagram.
2) Clean the working surface of the platform, place the height ruler on it, loosen the locking screw, move the ruler frame, and check whether the display screen and each key work normally.
3) Set the starting point of measurement. Generally, the platform surface is used as the zero point for measurement.
The steps to use the digital display height ruler are as follows:
1) Move the measuring claw to slightly contact the surface of the platform (measuring force is about 3-5N to ensure the accuracy of measurement), the display value should be zero, otherwise press ON/O to make the display zero.
2) Under special circumstances, if the digital display height ruler is used to measure the larger workpiece but the measuring range is not enough, the cushion block can be used to raise the height ruler base. At this time, the measurement zero point is still the platform surface, and the measurement starting point can be the surface of the cushion block or a surface of the workpiece. If the former is the starting point for measurement, the height value of the pad should be preset (more accurate instruments and measurement methods should be used to determine the value). If the measurement starting point is a surface of the workpiece, the height value of the surface of the workpiece should be preset (design value or actual value, depending on the actual need).
Note on the use of digital display height ruler:
1) Before using the digital display height ruler, please wipe the surface of the protective film repeatedly with a dry and clean cloth (which can be dipped with a little cleaning oil).
2) Working environment: temperature: 5-40℃, relative humidity: 80, to prevent moisture content of liquid material wet protective film surface.
3) Do not apply voltage to any part (such as engraving with an electric pen), so as not to damage the circuit.
4) Correctly set the starting point of measurement (see usage method). Unless the setting is changed, do not press the ON/O key randomly to avoid measurement errors.
5) Measure the sharp tip of the Java to prevent injury.
6) Replace the battery When the display is abnormal (does not show or flickers), replace the battery. Remove the battery cover in the direction of the arrow and replace it with a new battery.
Warm tip: as the digital display height ruler upgrade, digital display height ruler picture for reference only, details email consultation! More quality products welcome your consultation!
Dongguan Runzhi Electronics Co. , ltd.-the testing equipment division was established in 2011. It is a professional testing equipment brand center jointly established by professionals of electronic technology and equipment r & D for many years, set Research, development, manufacturing, marketing as one of the high-tech enterprises.
Dongguan Runzhi Electronics Co. , Ltd. mainly deals in laboratory equipment, including: Test Bench, laboratory environment tester, constant temperature and humidity chamber, aging tester, element detection combination instrument, floor residual depression meter, dimension tester, straight line angle tester, high-precision image projector, wheelchair tester, falling ball tester, falling sand tester, 90 degree peel strength tester, scratch tester, wear tester, blasting tester, tensile tester and other high-tech products.
The company operates a wide range of high quality instruments and equipment, including glossometers, whiteness meters, Energy Meters, densimeters, thermometers, viscometers, thickness meters, hardness meters, depth meters, high-precision electronic balance, caliper, gauge and so on.
Dongguan Runzhi Electronics Co. , Ltd. has many advantages, such as wide application, strong pertinence, wide variety, complete functions, excellent quality, sufficient stock, reasonable price and after-sales guarantee. With the joint efforts of Dongguan Runzhi Electronics Co. , Ltd. and many customers, our products and services are becoming more and more perfect. Have been invited to visit a number of well-known enterprises to provide advice and on-site guidance, has been the majority of customers, welcome new and old customers call letter advice: http://www.instrumentvip.com/
Dongguan Runzhi Electronics Co., Ltd.
Contact Person: Mr. Zheng
Department: Business Department
Post: Sales Manager
Telephone: +86 13712847488
Landline: +86 13717173764
Company Address: Room 101, 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China
Factory Address: Room 101, No. 33 Zhenma Road, Dalingshan Town, Dongguan City, Guangdong Province,China
Previous: automatic pencil hardness tester
Next: bursting strength tester